Workshop Closure Auction

Starts
Inspection 9am to 4pm day before the Auction and 8am to 10am on Auction Day
Location Offsite
26 Wells Street, Bellevue , WA 6056
Contact Craig Edwards 0411 649 604 Email

Collection

All goods must be collected by 4pm the following day

Buyers Premium & GST

A buyer's premium of 10.00% applies to this auction.
This auction is GST inclusive

Payment

Full Payment must be made within 24 hours.

Workshop Closure Auction

ON BEHALF OF THE VENDOR WE SHALL SELL: 4x Towmotors, Komatsu
2.5T Forklift, Airmal Compressor, Mobile Welder/ Generator, Capitol
Guillotine, William Adams Bender, Drill Press, Asst. Welders, Colchester
Lathe, 60T Press, Metaex Punch & Shear, Bandsaw, Dropsaw, Soco Cut
O Saw, Benches, Luggage, Trolleys & General Workshop Equipment.

All items are sold ‘as is, where is’

All items at Ross’s Auctions are sold on an ‘as is, where is’ basis. This means the item is being sold in its current condition, regardless of any faults or damage. The bidder accepts full responsibility in satisfying themselves with the item prior to bidding. It is recommended that that if the bidder is in doubt, not to bid as no returns or refunds will be made.

Lot: 1
Qty: 1
TOYOTA TOWING TRACTOR, AUTO, 4 CYL DIESEL 1DZ# MODEL# 02-2TD25, S/N: 2TD25-17195, YOM: 2008, 41,296 KMS SHOWING ON CLOCK (RUNS)
Lot: 2
Qty: 1
TOYOTA TOWING TRACTOR, AUTO, 4 CYL DIESEL 1DZ# MODEL# 02-2TD20, S/N: 2TD25-10872, YOM: 1991, 49,975 KMS SHOWING ON CLOCK (RUNS)
Lot: 3
Qty: 1
TOYOTA TOWING TRACTOR, MANUAL, 4 CYL PETROL, MODEL# T-G10, S/N: TG10-15418, YOM: UNKNOWN, 1,383 HRS SHOWING ON CLOCK (RUNS)
Lot: 4
Qty: 1
DETROIL DIESEL AIRCRAFT GROUND POWERED UNIT, HOBART CONTOLS, 7,594 HRS SHOWING (CONDITION UNKNOWN)
Lot: 5
Qty: 1
CUMMINS POWERED AIRCRAFT GROUND POWER UNIT, V504-E HOBART CONTROLS, 822 HRS SHOWING (CONDITION UNKNOWN)
Lot: 6
Qty: 1
QTY OF 9 x AIRPORT AIRCRAFT CARGO TRAILERS
Lot: 7
Qty: 1
STAINLESS STEEL TROLLEY & ASSORTED FABRICATED PIECES
Lot: 8
Qty: 1
KOMATSU FORKLIFT "PETROL" 2000KG, 4,702 HRS SHOWING, NO SIDESHIFT, COMPLETE WITH 2 METER FORK EXTENSIONS (RUNS)
Lot: 9
Qty: 1
HITACHI 355mm DROP SAW, MODEL# CC14 COMES WITH STAND & 1 x ADJUSTABLE ROLLER
Lot: 10
Qty: 1
SET OF FEED ROLLERS 6000MM X 300mm
Lot: 11
Qty: 1
CBC BENDER MODEL# UNI42, DOM: 2006 & 2 x BOXES DIES
Lot: 12
Qty: 1
1-11 WORKSHOP PEDESTAL FAN & 1 OFFICE FAN
Lot: 13
Qty: 1
LIFTEC 2000kg TROLLEY JACK
Lot: 14
Qty: 1
KROMEX LOW PROFILE 2000kg TROLLEY JACK
Lot: 15
Qty: 1
AUTO-AIR COMPRESSOR # 2525k SINGLE PHASE
Lot: 16
Qty: 1
ALUMINIUM 3 WHEEL WORKSHOP STAND
Lot: 17
Qty: 1
ASSORTED ALUMINIUM OFF CUTS, SQUARE-ROUND
Lot: 18
Qty: 1
RYOBI MITRESAW COMES WITH ALUMINIUM STAND # EMS 305RG
Lot: 19
Qty: 1
HEAVY DUTY WORKSHOP BANDSAW, P-A CIRCA 1960's 3 PHASE
Lot: 20
Qty: 1
MORETTI WORKSHOP FAN COMES WITH MISTING SYSTEM
Lot: 21
Qty: 1
WORKSHOP 7 DRAWER TOOL TROLLEY INCLUDING SOME ASSORTED TOOLS
Lot: 22
Qty: 1
"STURDEE" 150mm BENCH GRINDER # 633 MOUNTED ON STEEL PEDESTAL
Lot: 23
Qty: 1
SNAP ON "COUNSELOR" DIGITAL OSCILLOSCOPE, MODEL# MT1665
Lot: 24
Qty: 1
OXY TROLLEY COMES WITH HOSE, TORCH & GAUGES, NO BOTTLES
Lot: 25
Qty: 1
GMF 7" BENCH GRINDER, SINGLE PHASE COMES WITH STAND
Lot: 26
Qty: 1
WORKSHOP STEEL WORKBENCH COMES WITH 150mm OFFSET VICE 1800mm & 800mm WOODEN TOP WITH 5mm STEEL OVERLAY
Lot: 27
Qty: 1
QTY OF 4 x VEHICLE JACK STANDS
Lot: 28
Qty: 1
BOX OF REAMING TOOL 2"'
Lot: 29
Qty: 1
BOX OF ASSORTED OXY TIPS
Lot: 30
Qty: 1
BOX OF MACHINE TOOL
Lot: 31
Qty: 1
BOX OF "FEDERAL" MEASURING TOOL # 473-56RI
Lot: 32
Qty: 1
BOX OF "STANDARD" NO 5, 3 3/32 - 6 1/8 MEASURING GAUGE
Lot: 33
Qty: 1
BOX OF CUSTOM DRILL & TAP SET
Lot: 34
Qty: 1
BOX OF MEASURING TOOLS
Lot: 35
Qty: 1
BAG OF MILLER FALL RESTRAINTS
Lot: 36
Qty: 1
PROJECTA 2000 VEHICLE JUMP PACK
Lot: 37
Qty: 1
QTY OF ALUMINIUM CHECKER PLATE, STEPS & OFFCUTS
Lot: 38
Qty: 1
VERTICAL LINISHING WHEEL. 3 PHASE WITH BENCH
Lot: 39
Qty: 2
WORKSHOP SHELVING UNITS 1400mm x 700mm x 300 EACH
Lot: 40
Qty: 1
TROLLEY OF VEHICLE SPARES BEING FILTERS, STARTER MOTORS ETC
Lot: 41
Qty: 1
WILLIAM ADAMS "KLEEN" BENDER 1860mm BED
Lot: 42
Qty: 1
HYDRAULIC AIR OPERATED JACKING SYSTEM "35 TON"
Lot: 43
Qty: 1
CAPITAL CUILLOTINE MODEL# QC12Y, MAX 4mm THICKNESS, MAX WIDTH 2500mm, S/N: 812440
Lot: 44
Qty: 1
QTY OF STEEL OFFCUTS, RHS, FLAT
Lot: 45
Qty: 1
CIG TRANSARC WELDER (OLD)
Lot: 45A
Qty: 1
ALUMINIUM WORKSHOP TROLLEY
Lot: 45B
Qty: 1
QTY OF 2 x WORKSHOP LIGHTS
Lot: 46
Qty: 1
CAPITAL TW5035 DRILL PRESS, 3 PHASE, YOM: 2008
Lot: 47
Qty: 1
UNI-MIG 300 WELDER COMES WITH UNIMIG KT50 WIRE FEEDER
Lot: 48
Qty: 1
AIR-LIQUIDE SAF ZIP 2.0 TIE WELDER
Lot: 49
Qty: 1
BOC MIG 320R WELDER COMES WITH WF2 WIRE FEEDER
Lot: 50
Qty: 1
KEMPPI "KEMPACT" PULSE 3000 MIG WELDER
Lot: 51
Qty: 1
COLCHESTER TRIUMPH 2000 WORKSHOP LATHE COMES WITH ASSORTED ACCESSORIES
Lot: 52
Qty: 1
SERVEX HYDRAULIC 60 TON PRESS
Lot: 53
Qty: 1
AIRCRAFT FUEL DRAINAGE SAMPLING TANK, 205 LITRE
Lot: 54
Qty: 1
QTY OF 3 ADJUSTABLE STANDS WITH ROLLERS
Lot: 55
Qty: 1
SOCO MC-370F METAL DROP SAW & TABLE, YOM: 2009, 3 PHASE
Lot: 56
Qty: 1
METALEX HIW40 PUNCH & SHEARS
Lot: 57
Qty: 1
2 X TUBS OF BRASS , STAINLESS & ALUMINIUM OFFCUTS
Lot: 58
Qty: 1
CONTENTS OF SHELF UNIT - OILS, ABRASIVE DISCS ETC
Lot: 59
Qty: 1
LINCOLN REDI MIG 325s WELDER COMES WITH REDI-MIG 4 WIRE FEEDER
Lot: 60
Qty: 1
LINCOLN IDEAL ARC TIG 300/300 AC/DC - ARC WELDER
Lot: 61
Qty: 1
205 LITRE DRUM WORKSHOP BAGS
Lot: 62
Qty: 1
QTY OF 8 X PART FULL DRUMS OF ALUMINIUM CLEANER
Lot: 62A
Qty: 1
QTY OF AIR HOSE
Lot: 63
Qty: 1
SET OF MOBILE ELECTRONIC SCALES
Lot: 64
Qty: 1
3 x "WINDLEY BROS" MACHINE METAL SURFACE BEDS
Lot: 64A
Qty: 1
RICHMOND HYDRAULIC WORKSHOP TROLLEY
Lot: 65
Qty: 1
QTY OF ASSORTED SINGLE PHASE EXTENSION LEADS
Lot: 65A
Qty: 1
HYDRAULIC CYLINDER
Lot: 65B
Qty: 1
3 PHASE EXTENSION LEAD
Lot: 66
Qty: 1
HEAVY DUTY METAL WORKSHOP BENCH 2400mm x 800 x 900 - 4mm TOP
Lot: 66A
Qty: 1
SET OF MACHINERY SKATES 7.5T CAPACITY
Lot: 67
Qty: 1
SET OF KINCHROME 36" STILLSONS
Lot: 68
Qty: 1
QTY OF 6 x F-CLAMPS
Lot: 69
Qty: 1
QTY OF 3 x ASSORTED POWER TOOLS: SANDER, DRILL & HEAT GUN
Lot: 70
Qty: 2
TRAYS ASSORTED SPANNERS & TOOLS
Lot: 71
Qty: 1
HEAVY DUTY STEEL WORKSHOP BENCH 1870mm x 600 x 870H WITH 12mm PLATE TOP
Lot: 72
Qty: 1
ASSORTED HELMETS: 1 x SANDBLAST, 2 X WELDERS & 1 x FACE SHIELD
Lot: 73
Qty: 2
GEAR PULLERS: 1 x 100, 1 x 150mm
Lot: 74
Qty: 1
BOX OF ASSORTED KEYWAY STEEL
Lot: 75
Qty: 2
GREASE GUNS
Lot: 76
Qty: 1
DAWN 150mm BENCH VICE (NEEDS UNBOLTING)
Lot: 77
Qty: 1
CUPBOARD & CONTENTS: GOGGLES, TAPE & ABRASIVE DISCS
Lot: 78
Qty: 1
MOBILE PARTS BIN TROLLEY & CONTENTS INCLUDING NUTS & BOLTS
Lot: 79
Qty: 1
ALUMINIUM STEP 1000 x 1000mm
Lot: 80
Qty: 1
2 DOOR METAL CABINET CONTENTS BEING VEHICLE PAINT
Lot: 80A
Qty: 1
2 X WHEELIE BIN SPILL RESPONSE KITS
Lot: 81
Qty: 1
WORKSHOP BENCH COMES WITH 100mm VICE
Lot: 82
Qty: 1
16 x ASSORTED PARTS TRAYS
Lot: 83
Qty: 1
ASSORTED TOOLS: STILSONS FILES & PRY BARS
Lot: 84
Qty: 1
2 x PNEUMATIC RIVET GUNS
Lot: 85
Qty: 1
TEXTRON TX2000 BATTERY POWERED RIVET GUN COMES WITH BATTERY, CHARGER & CASE
Lot: 86
Qty: 1
WORKSHOP HAND OPERATED PUSH-PULL BAR
Lot: 87
Qty: 2
3 PHASE EXTENSION LEADS
Lot: 88
Qty: 1
JUMPER LEADS, CABLE & TIE-DOWNS
Lot: 89
Qty: 1
ASSORTED SPANNERS & SOCKETS
Lot: 90
Qty: 1
KINCHROME IMPERIAL LONG REACH SOCKETS 1/2 DRIVE
Lot: 91
Qty: 1
KINCHROME SOCKET SET (INCOMPLETE)
Lot: 92
Qty: 1
SCREWDRIVER SET & 450mm CRESCENT
Lot: 93
Qty: 2
2 x KC TOOLS LONGREACH SOCKET SETS, METRIC, IMPERIAL 1/2" DRIVE
Lot: 94
Qty: 2
2 x KC IMPACT SOCKET SETS, METRIC IMPERIAL 3/4" DRIVE
Lot: 95
Qty: 1
TAP & DIE SET UNC-UNF
Lot: 96
Qty: 1
KINCHROME SOCKET SET METRIC / IMPERIAL 3/8 - 1/4" DRIVE
Lot: 97
Qty: 2
WORKSHOP FLOOR CREEPER
Lot: 98
Qty: 1
A-FRAME SIGNAGE BOARD ON WHEELS
Lot: 99
Qty: 1
LOT OF 8 x WORKSHOP LOCKERS
Lot: 100
Qty: 1
LOT OF 3 x ALUMINIUM AIRCRAFT STORAGE TROLLEYS (TWA)
Lot: 100A
Qty: 4
ALUMINIUM CHECKER PLATE TRAYS 1000mm x 580 x 95mm
Lot: 100B
Qty: 4
ASSORTED 8" WHEELS & TYRES
Lot: 101
Qty: 1
ROUND TABLE & 4 x ASSORTED CHAIRS
Lot: 102
Qty: 1
QTY OF ASSORTED ALUMINIUM CHECKER PLATE & ASSORTED ALUMINIUM CHANNEL
Lot: 103
Qty: 1
KYOCERA KM-1635 OFFICE COPIER
Lot: 104
Qty: 1
LOT OF 3 x OFFICE STORAGE SYSTEMS, 1 X BOOKSHELF, 2 x 2 DOOR CUPBOARD
Lot: 105
Qty: 1
2 X OFFICE DESKS & 2 CHAIRS, 1 x 2 DRAWER PEDESTAL
Lot: 106
Qty: 1
FIRST AID KIT & ASSORTED EVEREADY BATTERIES
Lot: 106A
Qty: 1
PRESTIGE WATER COOLER & STAND
Lot: 106B
Qty: 1
QTY ASSORTED FIRE EXTINGUISHERS
Lot: 106C
Qty: 4
SAFETY CONES
Lot: 111
Qty: 1
SET OF ALUMINIUM STEPS 2800mm x 700mm
Lot: 111A
Qty: 1
QTY ASSORTED LENGTHS OF STEEL
Lot: 112
Qty: 1
VOLKSWAGON POWERED AIRCRAFT GROUND POWER UNIT (CONDITION UNKNOWN)
Lot: 113
Qty: 1
QTY OF SCRAP BATTERIES
Lot: 114
Qty: 4
GALVANISED DRIP TRAYS
Lot: 115
Qty: 1
QTY OF 6 x SAW HORSES
Lot: 116
Qty: 2
ALUMINIUM TRAYS
Lot: 116A
Qty: 1
STAINLESS STEEL TANK ROUND 1000mm x 300mm APPROX
Lot: 117
Qty: 1
FUSHENG V-40 AIR-MAC TWIN CLYINDER COMPRESSOR, 3 PHASE
Lot: 118
Qty: 3
PARTLY FULL 20 LITRE DRUMS, THINNERS, TURPS, GREASE REMOVER
Lot: 119
Qty: 1
QTY ASSORTED VEHICLE LUBRICANTS INCLUDING DRUM PUMPS
Lot: 120
Qty: 1
2 DOOR METAL CABINET 1200 x 850 x 300mm
Lot: 121
Qty: 1
METAL 4 TIER SHELF UNIT 1800 x 1800 x 500MM APPROX

The following conditions apply to this auction, in conjunction with the complete Conditions Of Sale and Online Terms And Conditions both of which are available on our website.

 

All items are sold ‘as is, where is’

All items at Ross’s Auctions are sold on an ‘as is, where is’ basis. This means the item is being sold in its current condition, regardless of any faults or damage. The bidder accepts full responsibility in satisfying themselves with the item prior to bidding. It is recommended that that if the bidder is in doubt, not to bid as no returns or refunds will be made.

Automatic Payment

This auction utilises Ross’s automatic payment system. Once the auction has closed all invoices under $2000.00 will be deducted directly from the credit card linked to your Ross’s premium account. This process streamlines the payment and invoicing of online auctions. For invoices above $2000.00 the buyer must complete payment through the ‘member tools’ area on the website, via direct deposit or in person at our Welshpool branch. All payments must be completed within one business day after the close of the auction.

Anti-Snipe Feature

This auction uses an 'anti snipe' feature which means that if a bid is made within 5 minutes of close, the bidding time will be extended by 5 minutes. This is to reduce the instances of bidders ‘sniping’ at the last minute of the auction. 

 

Inspections

All items in this auction have a formal inspection period. During this time bidders are able to inspect the lots they are interested in. It is the bidders responsibility to utilise this time to satisfy themselves with the condition of the lot. Inspections are recommended and will be deemed to have been taken in all cases.

 

Collection

All items purchased from a Ross’s Auction must be collected by 4pm the next business day unless otherwise stated. It is important that buyers are prompt in removing their purchased lots.  Any items not collected within the allotted time period will incur a storage fee from $50 per item per day. Ross’s reserves the right to resell any items that remain at our premises after 7 business days to recover any outstanding fees.

 

Refunds / Returns

As Ross’s sells all items on an ‘as is, where is’ basis no refunds or returns will be provided to bidders. It is the responsibility of the bidder to ensure that they are satisfied with the condition of the item before bidding. Ross’s accepts no responsibility for any errors in the description, listing or quantity of any lot. All descriptions and photos are to be used as a guide only.

If the successful purchaser fails to comply with the terms and conditions, Ross’s Auctioneers & Valuers reserves the right to retain the deposit and/or any other monies paid and the right to resell the Lot or Lots in any manner and upon such terms and conditions they may think fit.

Enclosed Footwear

Enclosed footwear must be worn to this particular auction. For the safety of all visitors, Bidders without the appropriate foot wear may have restricted site access.

 

Buyers Premium & GST

This auction has a buyer’s premium component. This premium is added on top of the hammer price. For example if the hammer price is $100.00 and the buyer’s premium is 10%, your final invoice for that lot will be $110.00. Each auction will note whether it is GST inclusive or exclusive. Please confirm this before bidding by checking the front page of the auction on our website.



Occupational Safety & Health Obligations

The legislation imposes obligations, such as providing and maintaining a safe work environment and preventing exposure to and protection from hazards on persons who use or operate plant in a workplace and on employers whose employees use or operate plant. If the buyer intends to use plant purchased at a workplace then it is the responsibility of the Buyer to inform themselves of these obligations.
 
Unless otherwise stated the plant to be sold has not been assessed or inspected by a competent person and it may or may not be affected by faults or defects, which make it unsafe for use. It is the responsibility of the Buyer to ensure assessment and inspection by a competent person. The Buyer is warned that items not previously assessed or inspected by a competent person may be suitable for scrap or spare parts only.
 
The Legislation requires that owners of plant maintain safety and health information and records. The Auctioneers will pass on to the buyer all information made available to them by the owner, but the Auctioneer does not warrant that the information and records are complete and accurate. It is the responsibility of the Buyer to familiarise themselves with all relevant information and records.
 

Workshop Closure Auction

ON BEHALF OF THE VENDOR WE SHALL SELL: 4x Towmotors, Komatsu
2.5T Forklift, Airmal Compressor, Mobile Welder/ Generator, Capitol
Guillotine, William Adams Bender, Drill Press, Asst. Welders, Colchester
Lathe, 60T Press, Metaex Punch & Shear, Bandsaw, Dropsaw, Soco Cut
O Saw, Benches, Luggage, Trolleys & General Workshop Equipment.

All items are sold ‘as is, where is’

All items at Ross’s Auctions are sold on an ‘as is, where is’ basis. This means the item is being sold in its current condition, regardless of any faults or damage. The bidder accepts full responsibility in satisfying themselves with the item prior to bidding. It is recommended that that if the bidder is in doubt, not to bid as no returns or refunds will be made.

Back to top