Surplus Machinery Online Auction

Starts
Closes
Inspection Tuesday the 11th June 10am - 3pm
Location 101 Kew St, Welshpool, WA 6106
Contact Dave Crofts 0418 945 349 Email

Collection

PICK UP: Goods to be collected by Appointment ONLY. Items located at 101 Kew Street Welshpool. Collections available from Tuesday 18th June

Buyers Premium & GST

A buyer's premium of 15.00% applies to this auction.
This auction is GST inclusive

Payment

Full Payment must be made within 24 hours.

Surplus Machinery Online Auction

On behalf of a State Government Department, we have been instructed to offer via an online auction the following surplus machinery equipment:

  • Bridgeport Adcock Shipley Milling Machine With Attachments
  • Harrison M250 Straight Bed Centre Lathe With Attachments
  • CIG Transarc Tradesman Portable Arc Welder
  • AC Type Spot Welder
  • 2012 Hafco Metal Masters Benchtop manual Panbrake
  • BK Australia 160kg Anvil
  • TEW Impulse Sealer
  • Dexion Manual Beam Cutter
  • Metal Strapping Machine

Welshpool. All items have been well maintained and regularly maintained.

Note a $250 (Plus GST) relocation fee to collection area payable by the purchaser (Lots 1 & 2 Only).

Contact Tristans Transport 0402 259 982 (Specialised Transport Services) for a quote to transport the Mill and Lathe.

13.6.19 NOTE SOME ACESSORIES HAVE BEEN ALTERED. ALL CURRENT PHOTOS ARE CORRECT

Collection by arrangement.

Contact Dave Crofts 0418 945 349

All items are sold ‘as is, where is’

All items at Ross’s Auctions are sold on an ‘as is, where is’ basis. This means the item is being sold in its current condition, regardless of any faults or damage. The bidder accepts full responsibility in satisfying themselves with the item prior to bidding. It is recommended that that if the bidder is in doubt, not to bid as no returns or refunds will be made.

​PICK UP: Goods to be collected by Appointment ONLY

Lot: 1
Qty: 1
BRIDGEPORT ADCOCK-SHIPLEY MILLING MACHINE, 2 SPEED RANGES WITH VARIABLE SPEEDS, 1.5HP ELECTRIC MOTOR. 415V 3 PHASE HARD WIRED (SELLER TO DISCONNECT). SLOTTED TABLE APPROX 1100 X 230MM. 120MM PLUNGE, 200MM MACHINE VICEINCLUDES LARGE RANGE OF ATTACHMENTS INC CHUCKS, DRILL BITS, PRECISION TOOLING, MARKING OFF PLATE, 4 DOOR METAL CABINET & METAL MOBILE TROLLEY. **NOTE: $250 PLUS GST RELOCATION COSTS TO LOADING AREA TO BE PAYABLE BY PURCHASER. FORKLIFT AVAILABLE TO ASSIST LOADOUT. COLLECTION BY ARRANGEMENT
$7,501 (86 bids) View Add to Watch List
Lot: 2
Qty: 1
HARRISON M250 STRAIGHT BED CENTRE LATHE, ELECTRIC MOTOR, 415v 3 PHASE HARD WIRED (SELLER TO DISCONNECT), 700MM BETWEEN CENTRES, AND ASSORTED ACESSORIES INC CHUCKS AND PRECISION TOOLING. **NOTE: $250 PLUS GST RELOCATION COSTS TO LOADING AREA TO BE PAYABLE BY PURCHASER. FORKLIFT AVAILABLE TO ASSIST LOADOUT. COLLECTION BY ARRANGEMENT
$3,940 (82 bids) View Add to Watch List
Lot: 3
Qty: 1
CIG TRANSARC TRADESMAN PORTABLE ARC WELDER. TYPE 625140 WITH FOOT CONTROL 3 PHASE (PLUG). **BENCH NOT INCLUDED
$77 (7 bids) View Add to Watch List
Lot: 4
Qty: 1
AC TYPE SPOT WELDER MODEL TSA 500. INC WELDER CONTROL SYSTEM, TRANSFORMER & INSTRUCTION MANUAL, 3 PHASE (PLUG)
$91 (15 bids) View Add to Watch List
Lot: 5
Qty: 1
2012 HAFCO METAL MASTERS BENCHTOP MANUAL PANBRAKEMODEL W10X610A. 600 X 1.0mm MILD STEEL BENDING CAPACITY INC INSTRUCTION MANUAL.
$330 (43 bids) View Add to Watch List
Lot: 6
Qty: 1
BK ANVIL 160LBS, MADE IN AUSTRALIA. ON LARGE WOOD BLOCK.IN EXCELLENT CONDITION
$1,705 (62 bids) View Add to Watch List
Lot: 7
Qty: 1
TEW IMPULSE SEALER TYPE TISF450, FREE STANDING WITH FOOT CONTROL. 600W 240V (PLUG). MAX SEAL WIDTH 450MM
$155 (25 bids) View Add to Watch List
Lot: 8
Qty: 1
DEXION MANUAL BEAM CUTTER
$51 (13 bids) View Add to Watch List
Lot: 9
Qty: 1
METAL STRAPPING MACHINE
$37 (14 bids) View Add to Watch List

The following conditions apply to this auction, in conjunction with the complete Conditions Of Sale and Online Terms And Conditions both of which are available on our website.

 

All items are sold ‘as is, where is’

All items at Ross’s Auctions are sold on an ‘as is, where is’ basis. This means the item is being sold in its current condition, regardless of any faults or damage. The bidder accepts full responsibility in satisfying themselves with the item prior to bidding. It is recommended that that if the bidder is in doubt, not to bid as no returns or refunds will be made.

Automatic Payment

This auction utilises Ross’s automatic payment system. Once the auction has closed all invoices under $2000.00 will be deducted directly from the credit card linked to your Ross’s premium account. This process streamlines the payment and invoicing of online auctions. For invoices above $2000.00 the buyer must complete payment through the ‘member tools’ area on the website, via direct deposit or in person at our Welshpool branch. All payments must be completed within one business day after the close of the auction.

Anti-Snipe Feature

This auction uses an 'anti snipe' feature which means that if a bid is made within 5 minutes of close, the bidding time will be extended by 5 minutes. This is to reduce the instances of bidders ‘sniping’ at the last minute of the auction. 

 

Inspections

All items in this auction have a formal inspection period. During this time bidders are able to inspect the lots they are interested in. It is the bidders responsibility to utilise this time to satisfy themselves with the condition of the lot. Inspections are recommended and will be deemed to have been taken in all cases.

Vehicle & Machinery Inspections

Vehicles & machinery may be inspected during the allotted time period. This provides bidders with the opportunity to thoroughly inspect the lots offered. Bidders must posses a current and valid license to operate the vehicle & machinery they are inspecting. Vehicles & Machinery may be started during the inspection period under the supervision of an authorised Ross’s Staff member. They CANNOT be started during the inspection the morning of the auction. 

Collection

All items purchased from a Ross’s Auction must be collected by 4pm the next business day unless otherwise stated. It is important that buyers are prompt in removing their purchased lots.  Any items not collected within the allotted time period will incur a storage fee from $20 per item per day. Ross’s reserves the right to resell any items that remain at our premises after 7 business days to recover any outstanding fees.

ALL COLLECTIONS ARE BY APPOINTMENT. COLLECTION OF LOTS 1 & 2 TO BE COLLECTED ON TUESDAY 18TH JUNE.

 

Refunds / Returns

As Ross’s sells all items on an ‘as is, where is’ basis no refunds or returns will be provided to bidders. It is the responsibility of the bidder to ensure that they are satisfied with the condition of the item before bidding. Ross’s accepts no responsibility for any errors in the description, listing or quantity of any lot. All descriptions and photos are to be used as a guide only.

If the successful purchaser fails to comply with the terms and conditions, Ross’s Auctioneers & Valuers reserves the right to retain the deposit and/or any other monies paid and the right to resell the Lot or Lots in any manner and upon such terms and conditions they may think fit.

Enclosed Footwear

Enclosed footwear must be worn to this particular auction. For the safety of all visitors, Bidders without the appropriate foot wear may have restricted site access.

Buyers Premium & GST

This auction has a buyer’s premium component. This premium is added on top of the hammer price. For example if the hammer price is $100.00 and the buyer’s premium is 10%, your final invoice for that lot will be $110.00. Each auction will note whether it is GST inclusive or exclusive. Please confirm this before bidding by checking the front page of the auction on our website. 

Interstate & international Buyers

Ross’s is a Western Australian based Auction house. If you are purchasing lots from interstate it is the bidder’s responsibility arrange the collection, packing and transportation of the goods within the allocated time frame. Ross’s are not able to secure or pack any items for delivery.

If you are an international bidder please contact the auction co-ordinator listed to make arrangements or enquire about the process.  



Occupational Safety & Health Obligations

The legislation imposes obligations, such as providing and maintaining a safe work environment and preventing exposure to and protection from hazards on persons who use or operate plant in a workplace and on employers whose employees use or operate plant. If the buyer intends to use plant purchased at a workplace then it is the responsibility of the Buyer to inform themselves of these obligations.
 
Unless otherwise stated the plant to be sold has not been assessed or inspected by a competent person and it may or may not be affected by faults or defects, which make it unsafe for use. It is the responsibility of the Buyer to ensure assessment and inspection by a competent person. The Buyer is warned that items not previously assessed or inspected by a competent person may be suitable for scrap or spare parts only.
 
The Legislation requires that owners of plant maintain safety and health information and records. The Auctioneers will pass on to the buyer all information made available to them by the owner, but the Auctioneer does not warrant that the information and records are complete and accurate. It is the responsibility of the Buyer to familiarise themselves with all relevant information and records.

Surplus Machinery Online Auction

On behalf of a State Government Department, we have been instructed to offer via an online auction the following surplus machinery equipment:

  • Bridgeport Adcock Shipley Milling Machine With Attachments
  • Harrison M250 Straight Bed Centre Lathe With Attachments
  • CIG Transarc Tradesman Portable Arc Welder
  • AC Type Spot Welder
  • 2012 Hafco Metal Masters Benchtop manual Panbrake
  • BK Australia 160kg Anvil
  • TEW Impulse Sealer
  • Dexion Manual Beam Cutter
  • Metal Strapping Machine

Welshpool. All items have been well maintained and regularly maintained.

Note a $250 (Plus GST) relocation fee to collection area payable by the purchaser (Lots 1 & 2 Only).

Contact Tristans Transport 0402 259 982 (Specialised Transport Services) for a quote to transport the Mill and Lathe.

13.6.19 NOTE SOME ACESSORIES HAVE BEEN ALTERED. ALL CURRENT PHOTOS ARE CORRECT

Collection by arrangement.

Contact Dave Crofts 0418 945 349

All items are sold ‘as is, where is’

All items at Ross’s Auctions are sold on an ‘as is, where is’ basis. This means the item is being sold in its current condition, regardless of any faults or damage. The bidder accepts full responsibility in satisfying themselves with the item prior to bidding. It is recommended that that if the bidder is in doubt, not to bid as no returns or refunds will be made.

​PICK UP: Goods to be collected by Appointment ONLY

Back to top